Akron Municipal Eductors feature a large, easy to read, and removable metering dial with infinite settings between 0% and 6%. The Eductors are rated to flow at 200 psi (14 bar) inlet pressure and work efficiently with nozzles rated from 50 to 100 psi (3 to 7 bar).

The Quick-Attack Foam Tubes are designed to easily and quickly clamp on to various Akron nozzles.

Environmentally responsible Hi-Combat A Class A foam concentrate, is a unique new formulation providing unmatched firefighting performance and flexibility. HiCombat A is specially designed for use in Class A/B foam systems and is excellent for Compressed Air Foam Systems (CAFS). This environmentally responsible formulation does not contain reportable components under SARA Title III, Section 313 of 40 CFR-372, or CERCLA.

Niagara from Angus Fire is the newest and most versatile addition to the Angus family of foams. It can be used on all Class A and B fires through all types of proportioning and application equipment. Niagara is truly the ultimate choice in foam for today's fire service. Niagara 1 X 3 is a superior quality Alcohol Resistant Film Forming Fluoroprotein (AR-FFFP) fire fighting foam concentrate for use at 1% on hydrocarbons and 3% on polar solvent liquid fires.

SPITFIRE is a high quality synthetic fire fighting foam concentrate designed to increase the effectiveness of water when mixed at a ratio between 0.1 and 1%. SPITFIRE is non-corrosive to equipment and can be premixed directly in water tanks. In addition, it is suitable for use in all proportioning systems, from in-line inductors to foam injection systems.

Tridol C 3% is a cost-effective synthetic Aqueous Film-Forming Foam (AFFF) concentrate for extinguishing and securing flammable hydrocarbon liquid fires. Tridol C 3% is a unique combination of hydrocarbon and fluorochemical surface active agents. It produces a vaporsealing aqueous film that spreads rapidly over the fuel surface to provide rapid control and extinguishment.

Tridol C 6% is a cost-effective synthetic Aqueous Film-Forming Foam (AFFF) concentrate for extinguishing and securing flammable hydrocarbon liquid fires. Tridol C 6% is a unique combination of hydrocarbon and fluorochemical surface active agents. It produces a vaporsealing aqueous film that spreads rapidly over the fuel surface to provide rapid control and extinguishment.

Class B Foam Agents are ideal for suppressing fires involving petroleum-based products, LNG, rubber, and flammable and combustible liquids; such as diesel fuel, crude oil gasoline and ethanol. ANSULITE Alcohol-Resistant Aqueous Film-Forming Foam (AR-AFFF) Concentrates produce a foam that is effective on hydrocarbon fuels as well as fuels such as methanol, ethanol and acetone which have appreciable water solubility or miscibility. AR-AFFF exhibits the best cross-functional performance for flame knock-down, burnback resistance, extended vapor suppression, manufacturing and proportioning consistency, and the longest potential shelf life.

SILV-EX PLUS is a low, medium, and high expansion, Class A foam concentrate formulated from specialty hydrocarbon surfactants, stabilizers, corrosion inhibitors and solvents. This formulation provides superior cold weather performance. The latest development in the original forest fire control concentrate, SILV-EX PLUS has been proven effective on many deep-seated Class A fires such as tire fires, paper fires, coal fires, structure fires, and wild fires. SILV-EX PLUS foam concentrate can be proportioned from 0.1% to 1.0% in fresh, brackish or sea water. When used as a pre-mixed solution, only fresh or potable water should be used if the premix is to be stored over long time periods. Due to its extremely low proportioning rate, SILV-EX PLUS foam concentrate offers outstanding economy in concentrate storage space, cost (compared to conventional 3% and 6% foaming agents) and water hauling requirements.

Chemguard Class A is a non-corrosive, non-toxic, biodegradable foam concentrate. When mixed with water in the correct proportion, it changes the properties of water. It reduces the surface tension of the water, and produces foam, which allows the water to cling to vertical or horizontal surfaces without run off. This allows the water to absorb more heat and provides greater penetration into Class A fuels.

Chemguard First Class is a non-corrosive, non-toxic, biodegradable Class A foam concentrate. When mixed with water in the correct proportion, it changes the properties of water. It reduces the surface tension of the water, and produces foam, which allows the water to cling to vertical or horizontal surfaces without run off. This allows the water to absorb more heat and provides greater penetration into Class A fuels.

Elkhart Brass has an eductor for all handlines (1” through 2½”). The eductors are compatible with most foam concentrates. All Elkhart eductors are easy to hook up and set up. All can be deployed in any position; they come with a removable pick-up screen, a metering valve, and a clear PVC pick-up hose
Selectable Metering - 0%, 1/2%, 1%, 3%, 6%

When greater expansion rates of foam solution are needed, a foam aeration tube can be quickly attached to many of Elkhart Brass’ combination fog nozzles. All tubes are Elk-O-Lite® cast finish with a nylon cord wrap.

Lightweight composite foam tubes are corrosion-resistant and easy to handle with bases that snap securely onto the nozzle in seconds. The foam tubes are specifically designed to require no alteration of the nozzle itself for use. The base of the tube includes large air intakes; expansion rates are easily varied with nozzle pattern.

Elkhart Brass has an eductor for all handlines (1” through 2½”). The eductors are compatible with most foam concentrates. All Elkhart eductors are easy to hook up and set up. All can be deployed in any position; they come with a removable pick-up screen, a metering valve, and a clear PVC pick-up hose
Selectable Metering - 0%, 1/2%, 1%, 3%, 6%

First Response Class A foam is an economy foam that provides good performance at higher use rates. First Response compares favorably to other economy foams, like Chemguard First Class and Ansul Silvex Plus. Phos-Chek Class A foam concentrates are specifically formulated to make water more effective. The unique combination of surfactants significantly reduces water's surface tension, creates a superior foam blanket when mixed with air that surrounds fuels with a thick layer of water, creates a barrier between the fuel and the fire, allows fire fighters to see application areas, and knocks down fire faster than water alone.

Phos-Chek® WD881 Class A foam was introduced over 20 years ago and has been widely used by government agencies around the world who are responsible for municipal, wildland, and industrial fire management. Phos-Chek WD 881 Class A foam concentrates continue to be the product of choice based on unparalleled superior performance. Phos-Chek Class A foam concentrates are specifically formulated to make water more effective. The unique combination of surfactants significantly reduces water's surface tension, creates a superior foam blanket when mixed with air that surrounds fuels with a thick layer of water, creates a barrier between the fuel and the fire, allows fire fighters to see application areas, and knocks down fire faster than water alone. Phos-Chek WD 881 performs exceptionally well in all foam application equipment including Compressed Air Foam (CAFS) systems.

Phos-Chek® WD881C Class A foam is specially formulated for use in cold water has been widely used by Canadian and northern US agencies that are responsible for wildland fire management. Phos-Chek WD 881C Class A foam concentrate is the product of choice in northern areas based on unparalleled superior performance. Phos-Chek Class A foam concentrates are specifically formulated to make water more effective. The unique combination of surfactants significantly reduces water's surface tension, creates a superior foam blanket when mixed with air that surrounds fuels with a thick layer of water, creates a barrier between the fuel and the fire, allows fire fighters to see application areas, and knocks down fire faster than water alone. Phos-Chek WD 881C performs exceptionally well in all foam application.

Foam Eductor - 95 GPM - 1.5" Female X 1.5" Male with 36" Hose. Metering Settings - .25% .5% 1% 3% 6%

TFT's PRO/pak foam injection and application system is the ideal choice for rapid vapor suppression with any Class A, AFFF or Alcohol Resistant foam concentrate. Everything you need is contained in one package that attaches to the end of your 1"(2.5 cm) fire hose. The PRO/pak has a high impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used.

TFT's PRO/pak foam injection and application system with angled coupling is the ideal choice for rapid vapor suppression with any Class A, AFFF or Alcohol Resistant foam concentrate. Everything you need is contained in one package that attaches to the end of your 1.5" (3.8 cm) fire hose. The PRO/pak has a high impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used.