The PRO-SAW/CUT-OFF Saw can cut virtually any material - brick, concrete, wood, steel, etc. The perfect fire service saw. Ergonomically designed to work in confined spaces. Light weight and powerful for safe and easy operation. Built tough to meet your extreme demands.

• General Specifications
• Power head dry weight must not exceed 21 lbs.
• Power head must run on a 50:1 fuel oil mixture
• Saw must be single cylinder, 2 cycle with loop scavenging
• Saw must include: power head, tool kit, manual, 1 bottles of two cycle oil
• Saw must have 120-day warranty
• Powerhead Specifications
• Saw power head must have 4.4 cubic inch displacement with a 2.05-inch molybdenum impregnated bore and 1.34 inch stroke
• Power head must develop 5.6 horsepower at 8500 RPM
• Power head shall idle at 2500 RPM and must obtain a maximum unloaded speed of 10,000 RPM
• Centrifugal clutch must engage at 3500 RPM
• Electronic Ignition must have lifetime warranty
• Carburetor must be an all position diaphragm type with integral fuel pump
• Carburetor must be fitted with a paper air filter
• Air filtering system must include a covered 3-stage foam air pre-filter to protect it from debris and water
• Carburetor must be isolated from the cylinder by a fiberglass spacer, rubber boot and isolating wall to prevent vapor lock
• Muffler must be side ported USFS and ANSI approved with spark arrestor
• Crankshaft shall be balanced two (2)-piece drop forged
• Crankshaft shall be supported by two (2) deep groove ball bearings
• Piston shall be made from a low friction alloy
• Rod shall have silver plated needle bearings
• Cylinder shall have asymmetrical cooling fins and shall be cooled by a high capacity fan
• Power head must be isolated from handle assembly by six (6) rubber "springs" to cancel vibration
• Saw shall have full wrap handle for operator protection and safety
• Saw shall have rear hand guard
• Saw shall have large D-ring handle for easy starting with gloves
• Saw must have positive position on/off switch for safety. (Momentary switch is not acceptable)
• Power head shall have large fill caps
• Fuel tank volume shall be 1.58 pints
• Blade Specifications
• Blade must be 14" diameter standard
• Saw must be able to accept abrasive, diamond and rescue blades
• Saw arbor size must be interchangeable to include discs with 20 mm, 7/8 or 1-inch arbor
• Blade shall have a maximum speed of 5000 RPM
• Cutting arm must be reversible from inboard to outboard side of power head
• Options
• Metal cutting Abrasive Blade
• Fuel Tank & Tool Storage
• Concrete Cutting Abrasive Blade
• Saw Strap
• Carbide Tipped Rescue Blade
• Eye & Hearing Protection
• Diamond Coated Blade
• Saw Case
• Multi-Purpose Blade
• Diamond Blade/Concrete
• Diamond Metal Cutting Blade

Highest Power To Weight Ratio
There is more power in our smaller saws than many larger saws

Air Injection Centrifugal Air Cleaning System
Allows longer intervals between filter cleaning. Reduces wear and operates smoother

Low Vibe System
Separates the handle from the engine, bar and chain. Effectively reduces tiring vibrations

Smart Start Decompression
This valve reduces piston compression while starting. This features reduces required pulling force and makes starting easier

Molybdenum Impregnated Piston, Rings, and Cylinders
Molybdenum is a substance that is impregnated into some metals that aid in the lubrication of those metals by coming to the surface as they heat up and receding into the metal when they cool

Advanced 3-Stage Air Filtration System

Insulated Handle

Combined Choke and Throttle Lock