The 100' Mid Mount Aerial offers all of the same features as the other Smeal aerials, except this unit is a midship mounted aerial, with a 5-section structure to achieve the travel height of 10' to get into those old firehouses. This apparatus can also be configured for other travel heights, such as 10' 6", 11', 11' 2", 11' 4", 11' 6". Each increase in travel height increases the amount of compartmentalization. The aerial is rated with a 500 lb. tip load while flowing 1,250 GPM, no restrictions. The Smeal exclusive CP-84 Waterway is the strongest, most durable waterway on the market and is standard on this model. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

All Smeal platforms have a rating of 1000 lbs. dry or 500 lbs. while flowing water, with no restrictions on this rating. When minimum stabilizer setup requirements have been achieved, the maximum ratings of the platform remain constant, regardless of the elevation, extension, or rotational placement of the aerial. The 100' Mid Mount Platform provides 17.5 square feet of inside working area, and is comprised of an innovative four-section modular platform that allows for cost-effective replacement if any part of it is damaged. The platform's front entry gates open outward to maximize interior work efficiency and can be folded back on double hinges to enable full access. In addition to its many safety features, the 100' Mid Mount Platform also offers a continuous handrail leading from the ladder to the the platform to protects climbers and a strategically positioned repelling arm to allow for safer entrance and exit.

All Smeal units are NFPA compliant and ULC certified and listed. We test all our designs and machines extensively, and we meet or exceed all minimum NFPA and ULC standards regarding structural safety factors, stability testing, and performance testing. Smeal platforms have a 1500 GPM flow rating with monitor capabilities of 45º up and down, and a full 180º horizontal sweep. Flows of 2000 GPM are also available.When minimum stabilizer setup requirements have been achieved, the maximum ratings of the platform remain constant, regardless of the elevation, extension, or rotational placement of the aerial. Our rear mounts are set at a negative 8º to a positive 72º operation range. The 100' Rear Mount Platform provides 21.5 square feet of inside working area, and is comprised of an innovative four-section modular platform that allows for cost-effective replacement if any part of it is damaged. The platform's front entry gates open outward to maximize interior work efficiency and can be folded back on double hinges to enable full access. In addition to its many safety features, the 100' Rear Mount Platform also offers a continuous handrail leading from the ladder to the the platform to protects climbers and a strategically positioned repelling arm to allow for safer entrance and exit.

The 100' Super Heavy Duty aerial offers superior strength as well as the many other features that come standard on a Smeal aerial. This apparatus offers composite auxiliary stabilizer pads, easy access turntable bolts, hot dip galvanized stabilizer beams, milled turntable surface, safety pins, tracking lights, as well as 1,500 lb. tip load while flowing 1,500 GPM, with no restrictions. The Smeal exclusive CP-84 Waterway is the strongest, most durable waterway on the market and is standard on this model. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

The 105' Heavy Duty Aerial is designed for use with tandem axle configurations. The base Quint model meets all requirements of NFPA. The aerial is rated with a 500 lb. tip load while flowing 1,250 GPM at zero degrees elevation 90 degrees perpendicular to the aerial device. This allows for no restrictions in the operation of the aerial device. This apparatus offers pump configurations from 1,250 GPM through 2,250 GPM, utilizing Waterous, Hale and Darley pumps. The tank configurations are 300-500 using UPF Poly tanks or Pro Poly fiberglass tanks. Smeal also offers a variety of hose bed configurations on the 105' Heavy Duty Aerial, including our exclusive EHL (Ergonomic Hose Load), the EZR (above the right side compartments), the EZ Load (allows high side compartments both sides, with two hose beds) or ahead of the turntable with hose chutes. The Smeal exclusive CP-84 Waterway is the strongest, most durable waterway on the market and is standard on this model. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

The 125' Heavy Duty Aerial offers the longest horizontal reach in the industry, with 121' horizontal reach and 125' of vertical reach. Not only does this apparatus have extensive reach, it also provides all the capabilities of other Smeal Aerials, including composite auxiliary stabilizer pads, easy access turntable bolts, hot dip galvanized stabilizer beams, milled turntable surface, safety pins, and tracking lights. This apparatus also give your team a 500 lb. tip load while flowing 1250 GPM, with no restrictions. The Smeal exclusive CP-84 Waterway is the strongest, most durable waterway on the market and is standard on this model. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

The 55' Heavy Duty Aerial is designed for single axle configurations. The base Quint model meets all requirements of NFPA. The aerial is rated with a 500 lb. tip load while flowing 1,250 GPM at 0 degrees elevation 90 degrees perpendicular to the aerial device. This allows for no restrictions in the operation of the aerial device. This apparatus offers pump configurations from 1,250 GPM through 2,250 GPM, utilizing Waterous, Hale and Darley pumps. The tank configurations are from 300-750 using Poly tanks. Smeal also offers a variety of hose bed configurations on the 55' Heavy Duty Aerial including our exclusive EHL (Ergonomic Hose Load), EZR (above the right side compartments), EZ Load (allows high side compartments both sides, with two hose beds) or ahead of the turntable with hose chutes. The Smeal exclusive CP-84 Waterway is the strongest, most durable waterway on the market and is standard on this model. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

The 75' Heavy Duty Aerial is designed for use with both single and tandem axle configurations. The base Quint model meets all requirements of NFPA. The aerial is rated with a 500 lb. tip load while flowing 1250 GPM at 0 degrees elevation 90 degrees perpendicular to the aerial device. This allows for no restrictions in the operation of the aerial device. This apparatus offers pump configurations from 1,250 GPM through 2,250 GPM, utilizing Waterous, Hale and Darley pumps. CAFS can be installed when using the tandem axle. The tank configurations are 300-600 using Poly tanks. Smeal also offers a variety of hose bed configurations on the 75' Heavy Duty Aerial including our exclusive EHL (Ergonomic Hose Load), EZR (above the right side compartments), EZ Load (allows high side compartments both sides, with two hose beds) or ahead of the turntable with hose chutes. There are many more options available with a tandem axle that do not increase the turning radius, compared to the same single axle 75' aerial chassis. In addition, there is more tire on the ground, which translates to more braking capacity and a much safer apparatus. The Smeal exclusive CP-84 Waterway is the strongest, most durable waterway on the market and is standard on this model. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

The 75' Heavy Duty Aerial is designed for use with both single and tandem axle configurations. The base Quint model meets all requirements of NFPA. The aerial is rated with a 500 lb. tip load while flowing 1250 GPM at 0 degrees elevation 90 degrees perpendicular to the aerial device. This allows for no restrictions in the operation of the aerial device. This apparatus offers pump configurations from 1,250 GPM through 2,250 GPM, utilizing Waterous, Hale and Darley pumps. Tank configurations are from 300-400 using Poly tanks. The Smeal exclusive CP-84 Waterway is the strongest, most durable waterway on the market and is standard on this model. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

Formerly the 87' Platform, this unit has undergone a complete redesign by the Smeal R&D team. Smeal decided it was time to take this unit to the next level. The new unit has an overall length of only 44' 10". Also, at a travel height of 11' (132"), a full ISO compliment of ground ladders can be carried. Current platform load capacities are 500 lbs. while flowing water or 1,000 lbs. dry. If you are in the market for an aerial platform, we strongly encourage you to operate a Smeal platform. We are confident that you will find it to be the smoothest operating platform available. Our midmounts have a negative 12º to a positive 72º operational range.

The Smeal platform incorporates a gravity level-sensing clinometer, rather than a master/slave system found on other platforms. We use this superior system because it is based on gravity, which means the platform will always remain level, even when the truck is positioned on a severe slope. Master/Slave systems level only to the degree at which the truck is positioned. Additionally, our system eliminates 50% of the hydraulic oil lines, which reduces the effects cold weather can have on all hydraulic leveling systems.

With the increased use of Compressed Air Foam, Smeal can offer a full line of CAFS pumpers. We have used the Waterous Eclipse, the Waterous 80 cfm through the 200 cfm PTO driven compressors, as well as the Hale and Darley systems.

A Smeal Custom Pumper is just that - truly custom designed to your specific needs. We specialize in listening to our customers. Our knowledgeable, experienced sales force and engineering staff will work diligently with your department truck committee to achieve a truck designed to its maximum capability and efficiency. Our customers tell us that the support we provide them sets us apart from other fire apparatus manufacturers. We are conscientious about post-delivery service and support. Our goal is to earn the respect and loyalty of all our customers and to provide today's firefighters with the best custom apparatus available.

Smeal's Enclosed Top Mount Controls apparatus provides you and your department with climate appropriate features. If you operate in the extreme cold, your team will benefit from enclosed pump panel controls. This option keeps the pump operator out of the elements and protects the controls from road grime and other residue. This apparatus offers many of the other special features available on Smeal pumpers, such as our proprietary QL-12 Electrical System, stainless steel plumbing, loaded front bumper, and GS-36 Substructure. Smeal is also proud to offer the EHL (Ergonomic Hose Load) to simplify the loading of large diameter hose system. And you can still get up to 900 gallons of water and excellent compartment configuration.

The Smeal R&D team, consisting of engineering, production and sales personnel, designed the Freedom line to be production efficient while maximizing the capabilities of the truck and maintaining a competitive price. The Freedom is available in two models -- the 1,000 gallon rescue/pumper application and the 1,250/1,500 tanker/pumper versions, which have dump valves.

Our stainless steel pumpers are designed with laser-cut and bolt-together construction. This design provides maximum durability and allows for ease of repair in the unfortunate event of a crash (when compared with welded stainless construction). This body comes standard with a 20 Year Structural Warranty. A full hot-dip galvanized steel substructure ensures unmatched toughness and capability.

The wide variety of design options in our Pumper/Tanker Series results in a custom fit for your department. We offer topmount or sidemount controls with tank sizes up to 3500 gallons. Dump valves can be positioned behind or ahead of the rear axles, and at the rear. Additionally, dump valves can be positioned between the tandem axles. They can be manual, electric or air operated in round or square configurations. Pond rack storage is available on either side of the apparatus through the high side compartments, in a separate rack, or on the hydraulic ladder rack. With Smeal, you have many chassis options to complete the truck that's right for your application.

We are proud to introduce you to the Rage, the most versatile wildland fire engine on the market. We took the best the industry has to offer and made it better to create this mini-monster. When you meet the Rage, you will quickly see how Smeal’s commitment to safety, strength, capability, performance, and durability makes it the best-in-class wildland apparatus. With its rear body mount that allows for independent flexing of the body, subframe, and chassis frame, and 12-gauge Galvaneal steel body, the Rage is equipped to handle even the harshest terrains. The Rage also features a Hale 750 gpm two-stage pump, seating for five, and our exclusive QL-12 electrical system, delivering unmatched firefighting efficiency.

The "UT" structure (originally Under Ten) was designed around the 105' aerial structure. The original structure was designed to be used with an 88" high cab to get a rearmount at a 10' travel height. It was designed to take 5" out the height of the aerial side rails compared to a 105' structure. Sometimes there is the need to get into a specific station or under an overpass that the 105' structure just cannot do. The unit still boasts a 500 lb. dry tip load and has almost all the features of a conventional 105' Aerial. With more than 8,000 available features and options, Smeal aerials are safe to operate, easy to control, and capable of maximum performance.

The Volunteer Series is designed for the "budget conscious" department that requires a solid truck at a competitive price. Starting with an economical base unit, the Volunteer Series has enough features and available options to create a truck that would be a welcome addition to any firehouse. Smeal offers a wide variety of chassis, both custom and commercial. Your Volunteer can have topmount or sidemount control panels. The standard water tank is 1000 gallons, but the Volunteer is also available in 1250 gallon models. With three different ground ladder storage locations, we provide the flexibility to design the truck that will meet your department's needs.

Smeal builds the quintessential multi-function wildland truck. These "do-all" trucks can respond to structure fires, wide open grass fires and everything in between. They are small in stature but large on capability, versatility and maneuverability. The wildland interface body is available on a wide variety of chassis, both custom and commercial. Smeal truly custom designs these small trucks by maximizing the available space with various compartment configurations.