Ball Intake Valve with Pressure Relief Valve and Locking Storz connection for flows up to 3,000 GPM.

Ball Intake Valve with Remote Control, Pressure Relief Valve and Locking Storz connection for flows up to 3,000 GPM.

Flow range up to 500 gpm (2000 l/min). The monitor features low friction inlet and outlet pivots. Elevation is manually adjustable between 10 and 50 degrees above horizontal. The water driven turbine makes the nozzle automatically sweep 10, 15, or 20 degrees either side of center. The oscillating mechanism can be disengaged and horizontal rotation moved manually.

SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre-connected to a hose line. Includes a safety tie-down strap with attached storage cap.

Automatic pressure control with a flow capacity of 95-300 gpm (360-1150 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free operator flow control, six detent flow positions, molded rubber teeth for full-fill "power fog", and "Gasket Grabber" inlet screen. Pistol grip is mounted below the valve (HD-VPGI), or behind the valve (HD-VPG).

Foam Eductor - 95 GPM - 1.5" Female X 1.5" Male with 36" Hose. Metering Settings - .25% .5% 1% 3% 6%

Automatic 100 psi (7 bar) pressure control with a flow capacity of 95-300 gpm (360-1150 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, molded rubber teeth for full-fill "power fog", and "Gasket Grabber" inlet screen. Pistol grip is mounted below the valve (H-2VPGI) or behind the valve (H-2VPG).

The Hydrant Master is a lightweight, low friction-loss hydrant valve that can be used in many water distribution applications. The valve is powered by (4) AA batteries, pressure activated, and equipped with a power-save mode. A handheld controller with pressure display and valve position feedback controls the valve up to 1200 feet (366 m) away. Both the valve and handheld are equipped with backlighting for use in low-light situations.

Fixed gallonage nozzle with 14 flow and pressure choices. Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. 1.5" NH (38mm) full-time swivel rocker lug coupling is standard.

Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear.

Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. 1.5" NH (38mm) full-time swivel rocker lug coupling is standard.

TFT's PRO/pak foam injection and application system is the ideal choice for rapid vapor suppression with any Class A, AFFF or Alcohol Resistant foam concentrate. Everything you need is contained in one package that attaches to the end of your 1"(2.5 cm) fire hose. The PRO/pak has a high impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used.

TFT's PRO/pak foam injection and application system with angled coupling is the ideal choice for rapid vapor suppression with any Class A, AFFF or Alcohol Resistant foam concentrate. Everything you need is contained in one package that attaches to the end of your 1.5" (3.8 cm) fire hose. The PRO/pak has a high impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used.

Selectable gallonage nozzle with four flow settings of 30, 60, 95, and 125 gpm @ 100 psi (110-230-360-470 l/min @ 7bar). All lightweight materials, hardcoat anodized aluminum. Flush without shutting down. Quick-change rear valve seat and stainless steel shut-off ball. Pistol grip is mounted below the valve. Rocker lug 1.5" NPSH swivel is standard.

The Res-Q-Rench is that one tool that can perform multiple fire ground functions. When space is limited, but performance is an absolute must, the folding Res-Q-Rench is ideal for all fire ground and rescue operations. From simple hose coupling functions, to working with patient entrapment, the Res-Q-Rench is the ultimate tool. Ideal for all firefighting personnel, rescue squads, medical service providers, and industrial fire brigades.

Selectable gallonage nozzle with six flow settings of 30, 60, 95, 125, 150, and 200 gpm @ 100 psi (110-230-360-470-570-750 l/min @ 7 bar). All lightweight materials, hardcoat anodized aluminum. Flush without shutting down. Quick-change rear valve seat and stainless steel shut-off ball. Pistol grip is mounted below the valve. Rocker lug 1.5" NPSH full-time swivel coupling is standard.

Full automatic 100 psi (7 bar) nozzle with 1.5" (38mm) coupling and thread. Flow range of 10-125 gpm (40-500 l/min). Includes pistol grip mounted below the valve, flush without shutting down, six position detent flow control slide valve, "Gasket Grabber" inlet screen, and molded rubber bumper with "power fog" teeth. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Rocker lug 1.5" NST (38mm) full-time swivel coupling is standard.